Yamaha Outboard E40XMH/XW-40PK

2 Stroke
scroll down

WORKING CLASS HEROES!

For more than thirty years Yamaha has been supplying reliable, heavy-duty outboards to the most demanding boaters of all : the people who make their living on the water. These Enduro outboards are designed from the bottom up to take the strain of long continuous hours of hard use. Years of rigorous testing have produced features that make the difference between a motor that goes the distance and those that quit along the way.

  • Manual Trim & Tilt method
  • Loop charging – Loop-charged scavenging creates a circular flow for efficient removal of exhaust gas and even distribution of air-fuel mixture. The result is greater combustion efficiency for higher power and better fuel economy.
  • Engine stop switch lanyard – This lanyard clips to clothing or around the wrist, stopping the engine immediately if the operator leaves the helm.
  • Shallow water drive – The outboard can be set at a tilt angle, preventing it from hitting the bottom when operating in shallow water.
  • Start-In-Gear Prevention
  • Overheat warning & Over-Rev Limiter
  • Extremely durable crankshaft
  • Long life piston/piston ring
  • Sturdy gears and gear case

Harga*
E40XMHS Rp. 48.600.000 | E40XMHL Rp. 49.700.000 | E40XWL Rp. 55.100.000
*Harga dapat berubah sewaktu waktu

Your Details

Please fill in you personal information so we can get back to you.

How can we help?

Tell us what question you have about our product.

This helps us prevent spam, thank you.

CAPTCHA gambar

Full Specification

2-Tak 40 PK 40 PK
NAMA MESIN F40XMH E40XW
Tipe Mesin 2-silinder 2-silinder
Tinggi Transom S = 16.7 in S = 16.7 in
L = 21.7 in L = 21.7 in
Vokume (isi) Silinder (cm3) 703 cc 703 cc
Diameter x Langkah 80.0 mm x 70.0 mm 80.0 mm x 70.0 mm
Jangkauan Operasi Maksimum 4500 - 5500 rpm 4500 - 5500 rpm
Perbandingan Kompresi 6 6
Sistem Induksi Bahan Bakar 1 karburator 1 karburator
Sistem Pengapian CDI CDI
Konsumsi Bahan Bakar 20.0 l/h @5000 r/min 20.0 l/h @5000 r/min
Perbandingan Gigi 2.00 (26/13) 2.00 (26/13)
Sistem Pelumas pre-mix pre-mix
Metode Trim & Tilt Manual Manual
Sistem Starter Manual Electric Starter
Sistem Kemudi Tongkat Kemudi Tongkat Kemudi
Berat 72-81 kg 72-81 kg

Do you need assistance?

If you have further question about our product, you can always reach us by using available contact form at contact section. You can always call our sales representative at :

  +62-21-390-5193

  +62-811-175-4040

Yamaha Official Dealer

Visit Official dealer and sales agent near your area for maintenance and repair, or if you need further assistance about sales and warranty.

Click available link below to view Yamaha Official Dealer

  Official Dealer

Order from Yamaha Marine

Visit Yamaha Marine website (yamahamarine.id) for direct order

  Yamaha Marine ID

Pendaftaran Garansi Online

Dapatkan perlindungan garansi dari PT. KBA untuk setiap pembelian motor tempel Anda.

Klik tautan dibawah ini untuk mendaftarkan garansi secara resmi.Situs PT. KBA akan membuka laman baru khusus untuk pendaftaran garansi.

Daftar Garansi

PT Karya Bahari Abadi (PT KBA) contribute to indonesia by providing water transportation product complete with support and after sales service across Indonesia.

Read More

    

Indonesia | English

Call PT. KBA
  +62-21-390-5193

Layanan pelanggan
Masukkan data anda untuk mengunduh dokumen